KUNZE Proofing chamber climate control system GK2
The air recirculation system draws in the air from above via ventilation slots and heats or humidifies it as required in order to achieve the required temperature and humidity values. The double radial blower blows the air-conditioned air below the proofing trolley, which hits the opposite door or wall of the room and is thrown back. As a result, the air in the proofing chamber circulates evenly and provides an optimum climate for your products. The climate control unit is usually placed on the rear wall of the proofing chamber. On its inside and outside, the housing of the air recirculation system is completely made of stainless steel (1.4301).
The capacity of the climate control unit is dimensioned for a chamber size of 12 m³. For larger proofing chambers, the climate control system is extended by additional air recirculation systems, according to the volume.
- The absolutely uniform proofing atmosphere ensures the same proofing for each product in the chamber
- No skin formation on your products
- The control cabinet is located outside the proofing cell and thus protected against humidity.
- Can be extended by any number of air recirculation systems
- Quick and uncomplicated operational start-up
- Only electricity and water supply lines are needed
- Easy maintenance due to easier access to all components
- Simple descaling without tools
- Special design also possible
| Total output | 8,2 kW |
| Heating capacity | 3,2 kW |
| Steam output | 5,0 kW |
| Fuse protection | 3x16 A träge |
| Steam connection | 2 x 3/4" |
| External dimensions | B: 500 x T: 200 x H: 1380mm |
| Total output | 5,6 kW |
| Heating capacity | 1,6 kW |
| Steam output | 4,0 kW |
| Fuse protection | 3x16 A träge |
| Steam connection | 3/8" |
| External dimensions | B: 500 x T: 200 x H: 1380mm |
- Ready-to-connect air recirculation system
- Control cabinet
- Combined sensor (humidity and temperature)
- Optional protective frame
